Common Plumbing Issues and How to Solve Them: A Guide by Bakersfield Plumbing Company

Welcome to the Bakersfield Plumbing Company blog! Serving Bakersfield, CA, and Kern County since 1910, we’ve seen it all when it comes to plumbing issues. Today, we’re diving into some of the most common plumbing problems homeowners face and how to fix them. Whether you’re dealing with a leaky faucet, clogged drains, or low water pressure, we’ve got you covered with professional tips and solutions.

1. Leaky Faucets

Problem: A dripping faucet is not only annoying but can also lead to higher water bills and wasted water.


  • Identify the Type of Faucet: Determine if you have a compression faucet, ball faucet, cartridge faucet, or ceramic disk faucet.
  • Turn Off Water Supply: Always turn off the water supply before beginning any repair.
  • Replace O-Rings and Washers: Most leaks are due to worn-out washers or O-rings. Disassemble the faucet, replace the damaged parts, and reassemble.
  • Call a Professional: If the leak persists, it may be a sign of a bigger issue that requires professional attention.

2. Clogged Drains

Problem: Slow or clogged drains are common in kitchens and bathrooms, often caused by hair, grease, soap, or food particles.


  • Use a Plunger: A plunger can often dislodge minor clogs. Ensure a tight seal and use strong, consistent pressure.
  • Baking Soda and Vinegar: Pour baking soda followed by vinegar down the drain. Let it sit for a while before flushing with hot water.
  • Plumbing Snake: For stubborn clogs, a plumbing snake can reach deep into the pipes to break up or retrieve the blockage.
  • Preventive Measures: Install drain screens and avoid pouring grease down the drain.

3. Low Water Pressure

Problem: Low water pressure can be caused by various factors including mineral buildup, pipe corrosion, or issues with the municipal water supply.


  • Check Aerators: Clean or replace aerators on faucets and showerheads. Mineral deposits can restrict water flow.
  • Inspect Pipes: Look for leaks or corrosion in your pipes. Damaged pipes may need replacement.
  • Pressure Regulator: Ensure your home’s pressure regulator is functioning correctly.
  • Municipal Supply Issues: If the problem persists, contact your local water supplier to check for wider issues.

4. Running Toilet

Problem: A running toilet wastes a significant amount of water and can drive up your utility bills.


  • Check the Flapper: Often, the flapper is not sealing properly. Replace if necessary.
  • Inspect the Fill Valve: Ensure the fill valve is shutting off properly once the tank is full.
  • Adjust the Float: Make sure the float is at the correct level to stop water at the proper fill level.
  • Call a Plumber: Persistent issues may require a professional to diagnose and fix the problem.

5. Water Heater Problems

Problem: Water heaters can suffer from a variety of issues including no hot water, insufficient hot water, or leaking.


  • Check the Thermostat: Ensure the thermostat is set to the correct temperature (usually 120°F).
  • Flush the Tank: Sediment buildup can reduce efficiency. Periodically flush the tank to remove sediment.
  • Inspect the Anode Rod: Replace the anode rod if it’s corroded to extend the life of your water heater.
  • Leaking Water Heater: If your water heater is leaking, it may need repair or replacement. Consult a professional plumber for an assessment.

At Bakersfield Plumbing Company, we pride ourselves on providing top-notch plumbing services and advice. Remember, while many plumbing issues can be resolved with a bit of DIY effort, don’t hesitate to call in a professional for more complex problems. Regular maintenance and prompt attention to minor issues can save you time, money, and stress in the long run.

For all your plumbing needs in Bakersfield, CA, trust the experts with over a century of experience. Contact Bakersfield Plumbing Company today!